Garage Door

Conduct a Garage Door Repair Safely and Perfectly

Is your garage door has started to malfunction? Do all components stop working altogether and you are thinking about changing a garage door. You can control all the problems by simply conducting DIY garage door repairs. Although, there are a lot of problems that you can fix by yourself they are very risky and challenging. You should be attentive while conducting a DIY garage door repair project. Don’t try to fix your garage door by yourself, if you are not sure about what is going on and you are not familiar with the machines and power tools. Thus, you will have to call a reputed, certified, and cost-effective garage door services to handle these problems. Click on the link http://garagedoorrepairbasehorks.com/ to get more information about garage door services.

When you have decided to perform the DIY garage door repair, it is essential to keep all the safety precautions in mind, so that you can protect yourself from injuries. Before starting anything, make sure that you have unplugged the garage door opener so that there is no danger of getting an electric shot. There are few things that you can check before calling an experienced garage door technician. Some problems are extremely easy to handle, for example, a squeaky garage door just needs a good cleaning and lubrication. Some tasks like, garage door torsion springs are extremely challenging and dangerous to handle which need professional help. Following are the things that you will have to check before calling a professional garage door repair services.

Check garage door tracks for damages

It is a very simple issue which can be solved easily. Garage door tracks often have bumps or dents. If you found any dented area, strike the tracks with a woodblock and a hammer to straighten the dented area. 

Check the alignment of garage door

If garage door tracks are not aligned properly, the garage door will not work. Here, you don’t need to replace the entire garage door. You may just loose the screws and bolts to readjust the tracks. Use the level to make sure that tracks are properly aligned.

Clean all the moving parts

Even though it may look obvious because the accumulated grease and hardened dirt may cause to a jammed garage door. In these cases, you just need to clean the tracks and then dry them with a cotton cloth. You can use the regular household cleaner to clean the garage door tracks.

Lubricate the moving parts

Just lubricating the garage door rollers and tracks will work to fix the issues in no time. You may use silicon spray or lubricant oil for this purpose. It is always suggested that lubricate the tracks after cleaning them. Any moving part of the garage door will get benefits from lubrication.

Tightening the loose screws and bolts

Screws and bolts tend to become loose and damage due to frequent use. Inspect the bracket thoroughly to find out any loose components involved in the operations of the garage door. In some cases, simply tightening up the brackets will help you to solve the problems. If you are not able to tighten up the brackets because the holes themselves become bigger, then you can use the small pieces of wood or any wood filler to fill the holes.    

Critical garage door problems

 If you have tried all the above-mentioned solutions, and none of them have been proved effective, the problems might be with the garage door springs system. However, it is not suggested to conduct a DIY work for the springs. These are the most dangerous and complex parts of the garage door especially if you have torsion springs. Unluckily, there are numerous cases, where homeowners have gotten seriously injured or killed due to the broken garage door springs. If you have any doubts about your projects, it is wise don’t try to attempt it by yourself. A professional garage door company will save you from injuries and unnecessary expenses.